Storage - creative solutions...

I have gotten many questions about where I store all of this Halloween stuff the rest of the year.  It is all about Volume! As in, don't just think about floor space.  Here I use the fencing as a suspended shelf to hold the lighter props above my head in the basement.
Our ceilings are tall enough that I can easily walk under the fencing.

Post Halloween Update - Failure as a Blogger

Halloween has come and gone and while it was a big success (more on that later), I have a ways to go before I can call myself a true blogger.  As the day got closer and closer I found myself with less and less time to update the blog.  I think that is partially because I was looking at the blog as more of a project archive rather than a way to share fun and interesting Halloween related things.  So, as I play catch-up over the next couple of weeks I hope to refine my blogging style and maybe figure out a way to keep this somewhat more active!

6' Armature is complete!

I mentioned it in a previous post, but now have the video and pictures to share.  I will probably end up using screws to secure several of the joints together.  Once I added the foam to the arms and legs and then added the clothes, there is more tension on the joints.  I also ordered two new hands since I only had the one shown in the picture...  They look good, but are too white so I will have to paint them a bit to make them match the mask a little better.

Coffin is complete! (for this year anyway)

I used 3/4" Pine plywood (three 4x8 sheets) and the plans at the following address:

http://wayneofthewoods.com/coffin%202.html

My joints aren't quite furniture grade, but it is very sturdy and will look great in the graveyard.  Before next year I will probably stain it and either add a cross to the lid or possibly cut a cross into the lid...  This took much less time that the 6' Armature since I had all the right tools:

• Table saw to cut the angles on the side boards
• Circular saw with straight edge to cut the top, bottom, and sides
• Hand plane to make the joints relatively tight
• Corded drill with countersink drill bits
• Cordless drill
• Speed triangle to keep things square and calculate the angles (which all matched what were listed on the website!

I fit very comfortably inside it, but haven't decided if I will be in it for Halloween this year or not... :-)

Update . . .

The torso for the 6 foot armature is complete!  It took two and a half large cans of crack sealer to completely cover the wire frame!  I took a couple of videos that I will shorten down and post soon (assuming the quality is OK).  I also have created the musculature for the arms and legs using an old mattress topper and some duct tape.  I'll post the finished pictures once the crack sealer is dry.

Finally, I just ordered all of the supplies listed on my Zombie makeup tutorial post so I can make a practice run at that before Halloween.  Expect a video in a couple of weeks...

6 Foot Armature

30 minutes seems to be my time allotment for Halloween projects...

I went to Home Depot on Saturday and bought materials for a bunch of projects:
- Grim Reaper Armature
- 6' Armature
- Coffin
- Modified Fog Chiller
- Tombstones

Here is the skeleton part of the 6' Armature, complete.  It only took about 30 minutes to make this and about half of the Grim Reaper skeleton. Next is to add the chest and bulk up the arms/legs and finish the reaper skeleton.  And don't worry, that isn't all neck, it will go to the top of the head inside whatever mask I am using on this dummy.

Grim Reaper Project Update

I spent about 30 minutes working on the Grim Reaper modification tonight:
- removed the terrible fabrics and grass
- reshaped the skull and eye sockets
- replaced broken zip ties holding skull to frame
- found that the wingspan was only 6'!  So, I removed the hands so I can lengthen the arms
- removed the blue LED eyes for now
Next up is to build the armature and sew the new cloak...

Project - Modifying store bought props: Grim Reaper

One of the easiest ways to get started on making your Halloween a bit spookier is to buy a prop and then look for ways to improve it!  Take this skeleton for example:

PROS:

• A full 10 feet tall!
• Features on face and hands are well defined

CONS:

• Hangs on the wall (not very good for an outside prop)
• Flimsy white fabric and lightweight paper are neither scary nor durable
• Arms are too short and are made with bent wire that isn't hidden by the fabric
• "Grass" hair has to go
• Blue eyes just aren't that scary

So basically for $79 I bought the head and hands, and a frame holding it all together.  The idea of this is really sound, however, especially when you place him standing in the middle of a graveyard surrounded by fog...

Plan:

• Replace all of the fabric with black broadcloth (purchased 12 yds. on sale for $1.99/yd)
• Use a black open-weave specialty Halloween cloth for the hood (purchased 3 yds. on sale for $6.30/yd)
• Trash the grass
• Lengthen the arms to be more appropriate for his height
• Create a scythe to scale with wood, paint black, and place in his hand
• Make him free-standing, rather than needing to hang
• Optional (if time allows): replace Blue LEDs with Red

Stay tuned for updated pictures as the project gets underway...

Halloween Treat Ideas in the September Williams-Sonoma Catalog

Check out the September Williams-Sonoma Catalog for some neat looking Halloween Treat ideas!

Williams-Sonoma Website

Book Review - How To Haunt Your House, Book One

This Book by Shawn & Lynne Mitchell is a great place to get started if you are looking for ideas to create indoor or outdoor props. The price was a bit higher than I would have expected, and there were too many pages wasted on the inside with colorfully lit props without accompanying how-to instructions. But overall, it covers many of the basics of prop making including painting effects, lighting, and fog machines.

Most of the supplies and tools are readily available around your house and the rest can be easily picked up at your local hardware or craft store. (I recommend saving old paint, Styrofoam, and even dryer lint throughout the year so you are ready) I created a version of the Graveyard Fence described in the book for Halloween last year.  It is amazing how much of a difference a fence can make in the overall effect of your yard decorations without too much cost. More on that later...

Liquid Latex - How To Video

Zombie Makeup Tutorial #2 - Rotting Flesh

The above is a great video on how to apply liquid latex.  I haven't tried it yet, but will post a video once I do.  Here are the supplies that are suggested in the video (links are to Amazon, but you can probably buy them other places as well):

Liquid Latex Ben Nye 8oz Bottle
Professional Makeup Wheels Ben Nye Master Bruise Wheel
Creme Color Liners Ben Nye Steel Grey
F/X Creme Colors Sallow Green
Translucent Powder Shaker Bottles 3.0oz Ben Nye Neutral Set (or Baby Powder or Corn Starch)
STIPPLE SPONGE 2-Pack Snazaroo Face Painting Sponge
Pampered Chef Citrus Peeler in Bright Orange Color
Toilet Paper
Cosmetic Wedge
Cosmetic Round
Powder Brush
Art Brushes

Welcome to Forget The Candy . . . And RUN!

For as long as I can remember, I have always loved Halloween.  Sure the candy was great, but my favorite part was running from house to house with my friends and wondering when (not if) someone or something was going to jump out and scare us.  See, I always assumed other people loved Halloween as much as I did and I was terribly disappointed when Trick-or-Treating would end without someone playing a "trick" on me and my friends.

When I was too old (by local laws) to go Trick-or-Treating anymore, I just couldn't give up the holiday.  So, I started setting up little Tricks around my front yard for the other kids.  It started out simple - a homemade ghost on fishing line run from my upstairs window to the top of a tree across the driveway.  But since that didn't really scare anyone I quickly progressed to Halloween makeup, spooky music, and props like "severed legs" and fake chainsaws.  My Senior Year in High School I even made my girlfriend (can you believe it, she still ended up marrying me years later) join in on the fun and play the part of the bloodied victim.  I knew I was on to something when my mom called me at college the next year and said that all of the kids were asking where I was as they collected their candy - without any Tricks.

Many years later, and with a kid of my own, I have gotten back to creating that fun anticipation for the neighborhood kids and spend a significant amount of time each year planning, building, and executing a Halloween theme.  Throw in an annual Halloween party and you can see why I decided to start this blog...  Stay tuned for ideas on music, costumes, makeup, party and lawn decorations, recipes, book and product reviews, event calendars, and many more things.